Home » Distribution » Red Lion Controls » Process Controls

Process Controls

AAMA

red lion process control units The Model AAMA is a Universal Signal Conditioning Module that can isolate and convert over 100 combinations of industry standard analog signal ranges. This module offers a DIP switch selection, isolated Input/Output signal circuit, and transformer.

AFCM

red lion process controllers The Model AFCM is an Analog to Frequency Converter Module that is designed to convert standard signals to frequency signals or pulse width modulated (PWM) signals.

AIMI

The Model AIMI is a passive isolator which is designed for electrical isolation and processing of an analog 0(4) to 20 mA standard current signals. This component provides electrical isolation between the control electronics and process I/O.

Converter Module

VCM-Voltage Converter Modules provide a accessible and convenient way to adapt RLC Counters to machine control voltage signals. VCM’s offer two input voltage ranges that cover the spectrum from 4-270 V.

CRMSTRLE

The Model CSMSTRLE is designed to communicate between platform, control for use with Modular Controller Series slave modules. This component offers high speed protocol to communicate through backplane connection with up to 16 slave modules. The master connection provides power to the modules.

CSDIO

The CSDIO Series modules offers a digital I/O module that is designed go the Modular Controller Series. These components offer 8 inputs and 6 outputs that can be used to monitor, contact or sensor inputs and activate relays, solenoids, PLC inputs, etc.

CSIN18/CSINV8

These Modular Controller Series offers a high density packaging and DIN rail mounting system. Modules connect and communicate through backplane connection to the CSMTR Modular Controller Series Master.

CSMSTRSX/CRMSTRGT

The Model CSMSTR is designed for control platform communications and used with Modular Controller Series slave modules. These modules use high speed serial protocol to communicate, through backplane connections up to 16 slave modules.

CSMSTRV2

The Model CSMSTR is designed for control platform communications and used with Modular Controller Series slave modules. These modules use high speed serial protocol to communicate, through backplane connections up to 16 slave modules.

CSOUT

The Model CSOUT is an analog output module that is designed for The Modular Controller Series. This module offers 4 isolated inputs that are programmable for output ranges of 0-5V, 01-10V, +/- 10V, 0-20 mA, or 4-20Ma.

CSPID

This series offers a full featured PID controllers designed with the Modular Controller Series. The CSPID modules connect and communicate through a backplane connection to the CSMSTR Modular Controller Series Master. These modules are available in several different output combinations including:

  • Relays
  • Open drain MOSFETs
  • Triac Outputs

CSSG

This module is a full features single loop PID controller designed for use with the Modular Controller Series. The module allows low level signals from a variety of a bridge-type tranducers including:

  • Load Cells
  • Pressure Tranducers
  • Torque Tranducers

Optional second signal inputs are also available for providing math capabilities between the two input channels. The modules connect an communicate through a backplane connection to the CSMSTR Master module.

CSTC8CSRTD6

The CST Series includes models (CSTC, CSRTD, CSINI, and CSINV). The modules are 16-bit analog inputs designed for the use with the Modular Controller Series. These modules provide high-density signal measurement for data-acquisition applications.

CUB4LP/CL

Model CUB4LP is a looped powered process indicator that uses 4 to 20 mA or 10 to 50 mA input signal as operating power. The input signal is also designed to power the backlighting on th CUB4LP40 unit.

Model CUB4CL is a current loop indicator that uses 4 to 20 mA or 10 to 50 mA input signal as operating power. The external power supply is used to power the CUB4CL backlighting that provides lower voltage and brighter, more consistent display.

CUB5/PRE0208

The CUB5 model series is a miniature electronic 8-digit dual counter and rate indicator. This component is flexible with optional relay output capability. The meter can is available in single or dual counter with rate indication capability. The display is available manual or automatic between selected displays.

DLC

The DLC model series is a dual loop controller that features a DIN rail mounted dual input PID controller. This component is designed as modular building block for multiple zone process control applications.

DLCD

The DLCD is a Dual Loop Controller with DH-485 network that features a dual loop PID controller to be controlled and monitored by an Allen Bradley PLC.

DLCN

The DLCN model series is a dual loop controller with a DeviceNet features a similar set and specifications as the standard Dual Loop Controller. This component is designed to operate as a DeviceNet Slave, in which supplies connection to a standard DeviceNet network.

IAMA

The IAMA is a Universal signal conditioning module series that can isolate and convert over 100 combinations of analog signal ranges. The IAMA3535 converts and transmits signals linearly proportional to the input. The IAMA6262 transmits the scaled square root of the input signal and provides an linear flow rate in applications, while exploiting a different pressure tranducer.

IAMA0006

The IAMA is able to become isolated and convert over 35 combinations of analog signal ranges. The IAMA converts and transmits proportional to the input. The DIP switch range allows quick setup for over 35 standard signal conversions.

IAMS

The IAMS is a Universal Signal Conditioner unmatched capability that provides ultimate flexibility. The component is can be completely isolated and offers conversion capabilities for most applications. The Universal Input accepts process, DC current, DC voltage, Thermocaouples, RTDs, Potionmeters, and linear resistance signals, which allows the module to be connected to most common sensors.

IFMA

The Model IFMA has a DIN-rail mounting and allows for frequency input, and outputs an analog voltage or current proportion to the input frequency, with 0.1% accuracy. IFMA utilizes a 7 position DIP switch, rotary switch, push-button and 2 indication LEDs to complete an input circuit configuration, operational parameter set-up, and I/O indication. The input circuitry is DIP switch selectable for a variety of sources.

IFMR

The Model IFMR allows for frequency input, and controls a single relay (SPDT) based on the value of the input frequency. The IFMR utilizes a 7 position DIP switch, rotary switch, push button, and two indication LEDs to insure input circuit configuration, operational parameter set-up, input signal, and relay status indication. DIP switch is flexible for a variety of sources.

LDA

The LDA is a large display that offers a DC volt, current, or process meter with scaling, serial communications and dual relay outputs. Versions are NEMA 4X/IP65 constructed and come with dual Form C relay outputs and RS232/RS485 serial communications.

Click here to submit a Request for Quote
or call us today at 800.324.1484