Toshiba Programmable Logic Controller (PLC)

Cordyne Industrial Controls is a leading provider of Toshiba programmable logic controllers made with years of technology and experience.

Request a Quote

Made in THE USA

Cordyne Motor Starter Selector

To help find the motor starter with your exact requirements, we have created a Motor Starter Selector Tool in which you are able to input your requirements and be matched with the appropriate motor starter.

Learn More

GWY-300 Series

The Gateway is a protocol converter that allows a device with a modbus RTU protocol to talk to a Toshiba T-Series PLC. The Gateway software is designed to communicate and registers between devices and controllers to registers in Toshiba PLC.

OIS40 R Keypads

The OIS40R is the same OIS (Operator Interface Station) as the OIS40 except that the PLC communication port is selectable, RS232 or RS485. As a result, its location is not limited to the 2 m maximum distance from the PLC like the OIS40. It can be located up to 1000 m (a little over ½ mile) from the PLC.

Another new feature on the OIS40R is that the keypad overlay is included separately. The overlay can easily be stuck on the OIS40R or replaced by a custom overlay which better describes the application—giving the operator more guidance on operation / data entry.

Standard features include:

20 Character by 4 Line Display
8 Function / Macro Keys
Numeric Key Pad for Data Entry
8 User Programmable LEDs
Unlimited Screens & Tasks
16 Definable Alarms

OIS Touch Screens

Ethernet Port on OIS120: Use for programming, connection to PLC, or connection to higher level controller. Communicate across the plant or across the country.
Multi Language Capability: Display text information in any Microsoft supported language. Export text file to co-worker in another country so that he can add his language. Then import text into OISeup32 software.
Pop Up Screens & Keypads: Conserve screen space on touch screens by popping up a keypad for data entry. Press a flashing alarm button to display a detailed alarm screen.
Alarm and Event Monitoring: Monitor status of alarms and specific events on one screen.
Trending: Touch screens can display process trends graphically for easy interpretation of process/machine history.
Horizontal or Vertical Orientation: Mount the touch screen so that it best fits the application. Screens can be created in either horizontal or vertical format.
Support for Floating Point Data: IEEE format double register data can be attached to any screen object such as bargraphs, meters, etc.
Serial Port Available for Printing Screens and Alarm Data: Send PLC or connected device information to any serial printer.
Low Cost OEM Keypad Models that Require No Programming Software: Use large memory capacity of Toshiba PLC to store messages and perform data entry.
Keypad Overlays Ship Separately on most Keypad Models: Allows OEMs to easily add custom overlay for specific application.

RS232/CMOS to RS422/RS485 Converter

RS232/CMOS to RS422/RS485 Converter converts RS232/CMOS lines to balanced RS422 or RS485 signals. RS232/CMOS to RS422/RS485 converter is available in two models,CNV-01and CNV-02-B.

Power is isolated from communication ports in CNV-01 model, whereas communication ports are not isolated. The converter is a port-powered (line-powered: RXD+RTS+CTS) or externally powered. In case of point to point communication and if the cable length is less than or equal to 2 mtr. at RS232 side, then external power supply is not needed. This unit takes less than 4mA to operate plus load current. Applications which require a large load current, external +24VDC power supply on the terminal strip is required. (NOTE: CMOS signals are not available with CNV-01 model) Both the communication ports as well as power is isolated in CNV-02-B model. This model operates on external 24VDC supply.

The unit has DB9 female connector on RS232/CMOS side and PBT on RS422/RS485 side. RS485 port has 4-wire with signal ground system and can also be made as 2-wire RS232-RS485 converter with signal ground system.