Eaton/Cutler-Hammer Pushbuttons

Toggle Switches-E10

Toggle Switches are intended for general purpose light industrial use and for retrofit and OEM applications. The E-10 switches have various circuit functions that include maintained and momentary.

Environmentally Sealed Toggle Switches-E10E

Designed for general purpose and OEM applications and provides a high IP68 rating for demanding environments. Toggle switches are environmentally sealed to prevent dust, moisture and other contaminants from corroding components.

Pushbutton Control Stations-Assembled

Pushbutton control stations are available in:

  • M22 Series
  • 10250T Series
  • 10250H Series (Heavy Duty)
  • 10250T Series (Heavy-Duty 30.5 mm)
  • E34 Series

22.5 mm Modular Pushbuttons-M22

The M-22 series operators are impact resistant for base mounting contact blocks and light units for quick wiring and are vibrating resistant.

30.5 mm Square Multifunction Watertight/Oiltight-E30

The E30 industrial pushbutton and indicating lights features a wide selection of square, multifunction operators in a standard 30.5 mm (1-13/64 in) diameter panel hole. These components are designed on control consoles and for a variety of industrial OEM applications.

30.5 mm Heavy-Duty Watertight/Oiltight-10250T

This pushbutton line features a heavy-duty zinc die cast construction with chrome-plated housing and mounting nut. Construction of component is durable and corrosive resistant.

30.5 Corrosion Resistant Watertight/Oiltight-E34

The E34 Series 30.5 mm pushbutton line features rugged die cast construction with 100% solid thermosetting cathodic epoxy coating. Coating provides a flat black smooth, consistent, corrosion resistant surface.

30.5 mm Watertight/Oiltight-HT800

The HT800 Series is part of the electrical sector family of 30.5 mm pushbutton devices. These devices include momentary, illuminated and mushroom head pushbuttons, selector switching, selector switches, indicating lights and push-pull switches. The HT800 devices are suitable for replacement of several other manufactures 30.5 mm pushbutton devices.

30.5 mm Class I Division 2 Hazardous Locations-10250T/E34

The 10250T1H consists of open-normally closed factory sealed contact block that is UL listed for use in Class I, Division 2, Groups B, C and D (NEC 500-503) Class I, Zone 2, IIB + H2 (NEC 505). Components designed for hazardous locations and is rated for NEMA A600 and NEMA Q300. 10250T and E34 illuminated components are also UL Listed for use in Class I, Division 2, Groups B, C and D (NEC 500-503)-Class I, Zone 2, IIB + H2 (NEC 505). This series is corrosion resistant and features a heavy-duty zinc-die cast constructions.

Request A Quote