WEG Motor Starters

Cordyne offers a full line of WEG electric motor starters and starter packages. WEG motor starters provide simple and reliable protection solutions for specific requirement needs. WEG starters is an industrial general purpose starter package that can be purchased as stand-alone units for your application, or can be integrated as part of a full industrial power control system.

We carry the following WEG starters:

WG-ES4 Series

FVNR motor starters for 1/4HP to 500HP motors
FVNR motor starter Heavy duty enclosure which is painted steel with ANSI61 gray powder coating. All components are mounted to enclosure’s back-pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications. IEC Contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range of standard options make it possible to adapt a “standard” control to your particular needs. Oversized Control Power Transformer (optional). Units are assembled, pre-wired and ready to go straight out of the box.

WG-CS4 Series

FVNR combination motor starters for 1/4HP to 500HP motors
FVNR combination motor starterHeavy duty enclosure which is painted steel with ANSI61 gray powder coating. All components are mounted to enclosure’s back-pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications. IEC Contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range of standard options make it possible to adapt a “standard” control to your particular needs. Oversized Control Power Transformer (optional). Units are assembled, pre-wired and ready to go straight out of the box. Molded Case Circuit Breaker with through-the-door handle.

WG-ENS4 Series

NEMA-rated motor starters for sizes 0-7
NEMA rated motor starterHeavy duty enclosure which is painted steel with ANSI61 gray powder coating. All components are mounted to enclosure’s back-pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications. NEMA Rated Non-Reversing motor starter with three leg protection overload heaters (included standard-sized to rated chart amps). Reset pushbutton is standard on all units. NEMA, UL, CSA & IEC rated components only. A wide range of standard options make it possible to adapt a “standard” control to your particular needs. Oversized Control Power Transformer (optional). Units are assembled, pre-wired and ready to go straight out of the box.

WG-CNS4 Series

NEMA-rated motor starters for sizes 0-7
NEMA rated motor starterHeavy duty enclosure which is painted steel with ANSI61 gray powder coating. All components are mounted to enclosure’s back-pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications. NEMA Rated Non-Reversing motor starter with three leg protection overload heaters (included standard-sized to rated chart amps). Reset pushbutton is standard on all units. NEMA, UL, CSA & IEC rated components only. A wide range of standard options make it possible to adapt a “standard” control to your particular needs. Oversized Control Power Transformer (optional). Units are assembled, pre-wired and ready to go straight out of the box. Includes a Molded Case Circuit Breaker with through-the-door handle.

WG-ESX-K Series

Explosion-proof FVNR motor starters – NEMA 7/9, 1/4HP to 500HP
explosion proof FVNR motor starterIEC Contactor with adjustable thermal Overload (Class 10) Oversized Control Power Transformer (optional), External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go. Integral Cast Mounting Feet. Units come standard with Hinged Covers. S.S. (316) Captive Quick Thread Cover Bolts (optional) Ground Lug Package Cast Mounting Pan. Bosses Cast From Copper – Free Aluminum – Max 0.25% Copper Content. Aluminum, Stainless Steel Shot or Sandblasted Natural Finish. Enclosures Suitable for NEMA 4X. Cast Aluminum and Stainless Steel Hinge.

WG-CSX-K Series

Explosion-proof FVNR combination motor starters – NEMA 7/9, 1/4HP to 500HP
explosion proof combination motor starterIEC Contactor with adjustable thermal Overload (Class 10) Oversized Control Power Transformer (optional), External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go. Integral Cast Mounting Feet. Units come standard with Hinged Covers. S.S. (316) Captive Quick Thread Cover Bolts (optional) Ground Lug Package Cast Mounting Pan. Bosses Cast From Copper – Free Aluminum – Max 0.25% Copper Content. Aluminum, Stainless Steel Shot or Sandblasted Natural Finish. Enclosures Suitable for NEMA 4X. Cast Aluminum and Stainless Steel Hinge. Includes a Molded Case Circuit Breaker with through-the-door handle.

WG-ES4XP Series

FVNR motor starters 1/4HP to 500HP, NEMA 4X enclosed, stainless steel or polyester enclosure
FVNR motor starterHeavy Duty, Corrosion Resistant, Molded Fiberglass Enclosure with gray injection coloring. All components are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X applications. IEC contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range of standard options make it possible to adapt a “standard” control to your particular needs. Oversized Control Power Transformer optional. Units are assembled, pre-wired and ready to go straight out of the box.

WG-CS4XP Series

FVNR combination motor starters 1/4HP to 500HP, NEMA 4X enclosed, stainless steel or polyester enclosure
FVNR combination motor starterHeavy Duty, Corrosion Resistant, Molded Fiberglass Enclosure with gray injection coloring. All components are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X applications. IEC contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range of standard options make it possible to adapt a “standard” control to your particular needs. Oversized Control Power Transformer optional. Molded case circuit breaker with through-the door 4X handle. Units are assembled, pre-wired and ready to go straight out of the box.

WG-ES4XS Series

FVNR motor starters 1/4HP to 500HP, NEMA 4X enclosed, stainless steel or polyester enclosure
FVNR motor starterHeavy Duty, Corrosion Resistant, 14 gauge Stainless Steel Enclosure with brushed finish. All components are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X applications. IEC contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range of standard options make it possible to adapt a “standard” control to your particular needs. Oversized Control Power Transformer optional. Units are assembled, pre-wired and ready to go straight out of the box.

WG-CS4XS Series

FVNR combination motor starters, 1/4HP to 500HP
FVNR combination motor starterHeavy Duty, Corrosion Resistant, 14 gauge Stainless Steel Enclosure with brushed finish. All components are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X applications. IEC contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range of standard options make it possible to adapt a “standard” control to your particular needs. Oversized Control Power Transformer optional. Molded case circuit breaker with through-the door 4X handle. Units are assembled, pre-wired & ready to go straight out of the box.

WG-ENSX-K Series

Explosion-proof FVNR combination motor starters, NEMA 7/9, 1/4HP to 500HP
explosion proof combination motor starterNEMA rated Contactor with Adjustable Thermal Overload (Class10), Oversized Control Power Transformer (optional). External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go. Integral Cast Mounting Feet. Units come standard with Hinged Covers, S.S. 316 Captive Quick Thread Cover Bolts (optional) Ground Lug Package, Cast Mounting Pan. Bosses cast from Copper-Free Aluminum – Max 0.25% Copper Content. Aluminum, Stainless Steel Shot or Sandblasted Natural Finish. Enclosures suitable for NEMA 4X Applications. Cast aluminum and Stainless Steel Hinge.

WG-CNSX-K Series

Explosion-proof FVNR combination motor starters, NEMA 7/9, 1/4HP to 500HP
explosion proof combination motor starterNEMA rated Contactor with Adjustable Thermal Overload (Class10), Oversized Control Power Transformer (optional). External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go. Integral Cast Mounting Feet. Units come standard with Hinged Covers, S.S. 316 Captive Quick Thread Cover Bolts (optional) Ground Lug Package, Cast Mounting Pan. Bosses cast from Copper-Free Aluminum – Max 0.25% Copper Content. Aluminum, Stainless Steel Shot or Sandblasted Natural Finish. Enclosures suitable for NEMA 4X Applications. Cast aluminum and Stainless Steel Hinge. Includes a Molded Case Circuit Breaker and external operating handle.

Request A Quote